-ALUMINUM SCRAP PRFIL 6063
It consists of door and window profiles, painted or unpainted, free of iron, locks, handles, and polyrethane rollers. it also consists of panel parts and chips.
-ALUMINUM SCRAP Taint Tabor
It consists of aluminum sheets and foil, free of iron, plastics, cans, and aluminum radiators, aircraft and tense aluminum.
-ALUMINUM SCRAP TENSE
It consists of tense aluminum from aircraft and automobile engines, free of iron, brass, dirt, and non metallic elements.
-ALUMINUM SCRAP UBC
It consists of clean aluminum cans, free of iron, dirt, fluids, and other contaminants and impurities.
-ALUMINNUM SCRAP TALK
1-It consists of cleaned aluminum and copper radiators with copper and/or aluminum fins on copper tubing; free of brass piping, iron and other impurities.
2-aluminum scrap talk with iron only
-ALUMINUM INGOTS OFF GRADE
Car wheels and clean without valves rubber and iron ,lead
-ALUMINUM SCRAP WHEEL
-ALUMINUM SCRAP RIDETOR
-ALUMINUM ALLOY
Aluminium and its alloy are used because of their optimum usage, lightness, corrosion resistance and strength. Aluminium alloys weight generally around a third of the weight of the equivalent sized steel component, with much better corrosion resistance. We will offer you most forms.
almanajim for metal scrap source various type of Alloys from its associate refineries situated in countries like China , Korea, Russia, Australia, Thailand, Middle East, Africa & Europe region with assured quality & competitive price . Aluminum Alloys like ADC12, ALSI132, LM4, LM24 and AC4B are some of the standard Alloys.
| AMERICAN STANDARDS – CHEMICAL ANALYSIS FOR ALUMINIUM CASTING ALLOYS | ||||||||||||
| Cu | Si | Mg | Zn | Fe | Mn | Ni | Ti | Pb | Sn | Cr | Al | |
| AC1A | 4.0~5.0 | 1.2 | 0.15 | 0.30 | > 0.40 | > 0.30 | > 0.05 | > 0.05 | > 0.05 | > 0.05 | > 0.05 | BAL |
| AC1B | 4.0~5.0 | 0.2 | 0.20~0.35 | 0.10 | > 0.30 | > 0.10 | > 0.05 | 0.05~0.30 | > 0.05 | > 0.05 | > 0.05 | BAL |
| AC2A | 3.0~4.5 | 4.0~6.0 | 0.25 | 0.50 | > 0.70 | > 0.50 | > 0.30 | > 0.20 | > 0.15 | > 0.05 | > 0.15 | BAL |
| AC2B | 2.0~4.0 | 5.0~7.0 | 0.5 | 1.00 | > 0.80 | > 0.50 | > 0.35 | > 0.20 | > 0.20 | > 0.10 | > 0.20 | BAL |
| AC3A | 0.25 | 10.0~13.0 | 0.015 | 0.30 | > 0.70 | > 0.35 | > 0.10 | > 0.20 | > 0.10 | > 0.10 | > 0.15 | BAL |
| AC4A | 0.25 | 8.0~10.0 | 0.35~0.60 | 0.25 | > 0.40 | 0.30~0.60 | > 0.10 | > 0.20 | > 0.10 | > 0.05 | > 0.15 | BAL |
| AC4B | 2.0~4.0 | 7.0~10.0 | 0.5 | 1.00 | > 0.80 | > 0.50 | > 0.35 | > 0.20 | > 0.20 | > 0.10 | > 0.20 | BAL |
| AC4C | 0.25 | 6.5~7.5 | 0.30~0.45 | 0.35 | > 0.40 | > 0.35 | > 0.10 | > 0.20 | > 0.10 | > 0.05 | > 0.10 | BAL |
| AC4CH | 0.2 | 6.5~7.5 | 0.25~0.40 | > 0.10 | > 0.17 | > 0.10 | > 0.05 | > 0.20 | > 0.05 | > 0.05 | > 0.05 | BAL |
| AC4D | 1.0~1.5 | 4.5~5.5 | 0.45~0.60 | > 0.30 | > 0.50 | > 0.50 | > 0.20 | > 0.20 | > 0.10 | > 0.05 | > 0.15 | BAL |
| AC5A | 3.4~4.5 | 0.6 | 1.30~1.80 | > 0.15 | > 0.70 | > 0.35 | 1.7 ~ 2.30 | > 0.20 | > 0.05 | > 0.05 | > 0.15 | BAL |
| AC7A | 0.1 | 0.2 | 3.60~5.50 | > 0.15 | > 0.25 | > 0.60 | > 0.05 | > 0.20 | > 0.05 | > 0.05 | > 0.15 | BAL |
| AC7B | 0.1 | 0.2 | 9.60~11.00 | > 0.10 | > 0.25 | > 0.10 | > 0.05 | > 0.20 | > 0.05 | > 0.05 | > 0.15 | BAL |
| AC8A | 0.8~1.3 | 11.0~13.0 | 0.80~1.30 | > 0.15 | > 0.70 | > 0.15 | 0.80~1.50 | > 0.20 | > 0.05 | > 0.05 | > 0.10 | BAL |
| AC8B | 2.0~4.0 | 8.50~10.50 | 0.60~1.50 | > 0.50 | > 0.80 | > 0.50 | 0.10 ~1.0 | > 0.20 | > 0.10 | > 0.10 | > 0.10 | BAL |
| AC8C | 2.0~4.0 | 8.5~10.5 | 0.60~1.50 | > 0.50 | > 0.80 | > 0.50 | > 0.50 | > 0.20 | > 0.10 | > 0.10 | > 0.10 | BAL |
| EUROPEAN STANDARDS | ||||||||||
| Cu | Si | Mg | Zn | Fe | Mn | Ni | Ti | Pb | Al | |
| LM2 | 0.70 ~ 2.50 | 9.0 ~ 11.50 | 0.3 | 2.00 | 1.00 | 0.50 | 0.50 | 0.20 | 0.30 | BAL |
| LM4 | 2.00 ~ 4.00 | 4.0 ~ 6.0 | 0.15 | 0.50 | 0.80 | 0.20 ~ 0.60 | 0.30 | 0.20 | 0.10 | BAL |
| LM9 | 0.10 | 10.0 ~ 13.0 | 0.20 ~ 0.60 | 0.10 | 0.60 | 0.30 ~ 0.70 | 0.10 | 0.20 | 0.10 | BAL |
| LM10 | 0.10 | 0.25 | 9.50 ~ 11.00 | 0.10 | 0.35 | 0.10 | 0.10 | 0.20 | 0.05 | BAL |
| LM12 | 9.00 ~ 11.00 | 2.50 | 0.20 ~ 0.40 | 0.80 | 1.00 | 0.60 | 0.50 | 0.20 | 0.10 | BAL |
| LM13 | 0.70 ~ 1.50 | 10.0 ~ 13.0 | 0.80 ~ 1.50 | 0.50 | 1.00 | 0.50 | 1.50 | 0.20 | 0.10 | BAL |
| LM16 | 1.00 ~ 1.50 | 4.50 ~5.50 | 0.40 ~ 0.60 | 0.10 | 0.60 | 0.50 | 0.25 | 0.20 | 0.10 | BAL |
| LM18 | 0.10 | 4.50 ~ 6.00 | 0.10 | 0.10 | 0.60 | 0.50 | 0.10 | 0.20 | 0.10 | BAL |
| LM20 | 0.40 | 10.00 ~ 13.00 | 0.20 | 0.20 | 1.00 | 0.50 | 0.10 | 0.20 | 0.10 | BAL |
| LM21 | 3.00 ~ 5.00 | 5.0 ~ 7.0 | 0.10 ~ 0.30 | 2.00 | 1.00 | 0.20 ~ 0.60 | 0.30 | 0.20 | 0.20 | BAL |
| LM22 | 2.80 ~ 3.80 | 4.0 ~ 6.0 | 0.05 | 0.15 | 0.60 | 0.20 ~ 0.60 | 0.15 | 0.20 | 0.10 | BAL |
| LM24 | 3.00 ~ 4.00 | 7.50 ~ 9.50 | 0.30 | 3.00 | 1.30 | 0.50 | 0.10 | 0.20 | 0.30 | BAL |
| LM25 | 0.10 | 6.50 ~ 7.50 | 0.20 ~ 0.45 | 0.10 | 0.50 | 0.30 | 1.00 | 0.20 | 0.10 | BAL |
| LM26 | 2.00 ~ 4.00 | 8.50 ~ 10.50 | 0.50 ~ 1.50 | 1.00 | 1.20 | 0.50 | 0.30 | 0.20 | 0.20 | BAL |
| LM27 | 1.50 ~ 2.50 | 6.00 ~ 8.00 | 0.3 | 1.00 | 0.80 | 0.20 ~ 0.60 | 0.80 ~ 1.50 | 0.20 | 0.20 | BAL |
| LM28 | 1.30 ~ 1.80 | 17.00 ~ 20.00 | 0.80 ~ 1.50 | 0.20 | 0.70 | 0.60 | 0.20 | 0.10 | BAL | |
| LM29 | 0.80 ~ 1.30 | 22.00 ~ 25.00 | 0.80 ~ 1.30 | 0.20 | 0.70 | 0.60 | 0.80 ~ 1.30 | 0.20 | 0.10 | BAL |
| LM30 | 4.00 ~ 5.00 | 16.00 ~ 18.00 | 0.40 ~ 0.70 | 0.20 | 1.10 | 0.30 | 0.10 | 0.20 | 0.10 | BAL |
| CHEMICAL ANALYSIS FOR EXTRUSION BILLETS | |||||||||||
| Cu% | Si% | Mg% | Zn% | Fe% | Mn% | Ti% | Cr% | Other% | Total% | Al% | |
| 1050 | 0.05 | 0.25 | 0.05 | 0.05 | 0.40 | 0.05 | 0.03 | 0.03 | 0.03 | 0.10 | BAL |
| 1070 | 0.04 | 0.20 | 0.03 | 0.04 | 0.25 | 0.03 | 0.03 | 0.03 | 0.03 | 0.10 | BAL |
| 2011 | 5.6~6.0 | 0.40 | 0.05 | 0.30 | 0.70 | 0.05 | 0.05 | 0.05 | Pb 0.20~0.60 | Bi 0.20~0.60 | BAL |
| 2017 | 3.5~4.5 | 0.80 | 0.2-0.5 | 0.25 | 0.70 | 0.40~1.0 | 0.15 | 0.10 | 0.05 | 0.15 | BAL |
| 2024 | 3.8~4.9 | 0.50 | 1.2-1.8 | 0.25 | 0.50 | 0.30~0.90 | 0.15 | 0.10 | 0.05 | 0.15 | BAL |
| 3303 | 0.05 | 0.60 | 0.05 | 0.10 | 0.70 | 0.10~1.50 | 0.05 | 0.05 | 0.05 | 0.15 | BAL |
| 3004 | 0.25 | 0.30 | 0.8-1.3 | 0.25 | 0.70 | 0.10~1.50 | 0.05 | 0.05 | 0.05 | 0.15 | BAL |
| 4043 | 0.30 | 4.5~6.0 | 0.05 | 0.10 | 0.80 | 0.05 | 0.20 | 0.05 | 0.05 | 0.15 | BAL |
| 5052 | 0.10 | 0.25 | 2.2~2.8 | 0.10 | 0.40 | 0.10 | 0.05 | 0.15-0.35 | 0.05 | 0.15 | BAL |
| 5056 | 0.10 | 0.30 | 4.5~5.6 | 0.10 | 0.40 | 0.05~0.20 | 0.05 | 0.05~0.20 | 0.05 | 0.15 | BAL |
| 6005 | 0.10 | 0.6~0.9 | 0.45~0.9 | 0.10 | 0.35 | 0.10 | 0.10 | 0.10 | 0.05 | 0.15 | BAL |
| 6061 | 0.15~0.4 | 0.4~0.8 | 0.8~1.2 | 0.25 | 0.70 | 0.15 | 0.15 | 0.04~0.35 | 0.05 | 0.15 | BAL |
| 6063 | 0.10 | 0.2~0.6 | 0.45~0.9 | 0.10 | 0.35 | 0.10 | 0.10 | 0.10 | 0.05 | 0.15 | BAL |
| 6151 | 0.35 | 0.6~1.2 | 0.45~0.8 | 0.25 | 1.00 | 0.20 | 0.15 | 0.15~0.35 | 0.05 | 0.15 | BAL |
| 7005 | 0.10 | 0.35 | 1.0~1.8 | 4.50~5.50 | 0.40 | 0.20~0.70 | 0.01~0.06 | 0.06~0.2 | Zr 0.08~0.20 | 0.15 | BAL |
| 7075 | 1.2~2.0 | 0.40 | 2.10~2.90 | 5.10~6.10 | 0.50 | 0.30 | 0.20 | 0.18~0.35 | 0.05 | 0.15 | BAL |
| JAPANESE STANDARD | ||||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Ni | Zn | Sn | Ti | Pb | Cr | Similar to* |
| ADC1 | 11.0-13.0 | 0.9 | 1.0 | 0.3 | 0.3 | 0.5 | 0.5 | 0.1 | AC-44300, 413.0, Y102 | |||
| ADC3 | 9.0-10.0 | 0.9 | 0.6 | 0.3 | 0.4-0.6 | 0.5 | 0.5 | 0.1 | AC-43400, A360.0, Y104 | |||
| ADC | 0.3 | 1.1 | 0.2 | 0.3 | 4.1-8.5 | 0.1 | 0.1 | 0.1 | ||||
| ADC6 | 1.0 | 0.6 | 0.1 | 0.4-0.6 | 2.6-4.0 | 0.1 | 0.4 | 0.1 | ||||
| ADC10 | 7.5-9.5 | 0.9 | 2.0-4.0 | 0.5 | 0.3 | 0.5 | 1.0 | 0.3 | AC-46500, 380.0 | |||
| ADC10Z | 7.5-9.5 | 0.9 | 2.0-4.0 | 0.5 | 0.3 | 0.5 | 3.0 | 0.3 | A380.0 | |||
| ADC12 | 9.6-12.0 | 0.9 | 1.5-3.5 | 0.5 | 0.3 | 0.5 | 1.0 | 0.3 | AC-46000, AC-46100, A384.0 | |||
| ADC12Z | 9.6-12.0 | 0.9 | 1.5-3.5 | 0.5 | 0.3 | 0.5 | 3.0 | 0.3 | 383.0 | |||
| ADC14 | 16.0-18.0 | 0.9 | 4.0-5.0 | 0.5 | 0.5-0.65 | 0.3 | 1.5 | 0.3 | B390.0 | |||
| *Remark: These alloys are similar due to their chemical composition. From this you cannot conclude that they are comparable regarding rigidity, yield stress, fracture toughness or corrosion resistance. This has to be checked separately for each alloy. | ||||||||||||